MIT engineers claim fuel cell breakthrough

  • Email a Friend
  • Print Page
By Staff writers
May 19, 2008 7:45 AM
Tags: MIT | engineers | claim | fuel | cell | breakthrough

A group of engineers at MIT has developed a new type of membrane for one type of fuel cell which they claim could improve power output by more than 50 percent..

The new material is considerably less expensive than its conventional industrial counterpart, and could help fuel cells to find a much broader market, particularly in portable electronics.

"Our goal is to replace traditional fuel-cell membranes with these cost-effective, highly tuneable and better-performing materials," said Paula T. Hammond, Bayer Professor of Chemical Engineering at MIT, and leader of the research team.

The team focused on direct methanol fuel cells (DMFCs) in which the methanol is directly used as the fuel. Reforming of alcohol down to hydrogen is not required.

Such a fuel cell is attractive because the only waste products are water and carbon dioxide, the latter produced in small quantities.

Also, because methanol is a liquid, it is safer and easier to store and transport than hydrogen gas.

However, DMFCs on the market have limitations as the material currently used for the electrolyte, known as Nafion, is expensive.

Furthermore Nafion is permeable to methanol allowing some of the fuel to seep across the centre of the fuel cell, thereby wasting fuel and lowering the efficiency of the cell.

Using a relatively new technique known as layer-by-layer assembly, the MIT researchers created an alternative to Nafion which is two orders of magnitude less permeable to methanol but compares favourably to Nafion in proton conductivity.

To test their creation, the engineers coated a Nafion membrane with the new film and incorporated the whole into a direct methanol fuel cell. The result was an increase in power output of more than 50 percent.

The team is now exploring whether the new film could be used by itself, completely replacing Nafion.

Hammond noted that the new material also has potential for use in other electrochemical systems such as batteries, and that the team has begun exploring the new material's potential use in photovoltaics.

Copyright © 2009 vnunet.com


 
Comments

Be the first to comment on this article.
Thoughts on this article? Add a comment below.
Comment:
Want to participate in the discussion?
Or log in now to comment
 
 
Top Stories
Conroy opens NBNCo regulation debate
Part two of the regulatory reforms paper.
 
Utilities wise up to smart grids
Power to the people?
 
Sydney Water turned off wrong pipe
Admits error with Macquarie Telecom data centre.
 
Exclusive Data Centre - Sponsored Content by Microsoft

Latest Comments

" Erin Kutz wrote: A tiny fraction of those who use the fast-growing social network phenomenon ..."
by Slatts Jul 6, 2009 8:58 AM
 
"I'm thinking there was some robust discussion in the Sawers household when Sir John got home ..."
by Slatts Jul 6, 2009 8:41 AM
 
"Well... that seems disturbing but I just can't seem to put my finger on why. I think it just ..."
by Slatts Jul 6, 2009 8:35 AM
 
"I turn bluetooth off on my mobile to save the battery. Looks like now I've got another reason. "
by Slatts Jul 4, 2009 1:09 PM
 
"I'm kind of assuming that the water was used in water cooled condensers for the air-conditioning...."
by Slatts Jul 2, 2009 8:54 PM

Polls

What will you do when your iPhone contract comes up for renewal?




   |   View results
Retain my current service provider
  12%
 
Switch to a cheaper plan
  18%
 
Switch to a better network
  18%
 
Switch to whoever offers free tethering
  18%
 
Change handset altogether
  36%
TOTAL VOTES: 200

Vote